BOMEDENT Endo motor

EGP9,000.00

Ergonomic design, small size. The max diameter less than 28mm. The head holding part is just 16mm.Therefore dentists can get better sight and more convenient  operation

 ONE-KEY operation design with M3 Reciprocating motion

Two parallel operating system: M3 ONE-KEY & Normal Settable system

 

Description

Description

Ergonomic design, small size. The max diameter less than 28mm. The head holding part is just 16mm.Therefore dentists can get better sight and more convenient  operation

 ONE-KEY operation design with M3 Reciprocating motion

Two parallel operating system: M3 ONE-KEY & Normal Settable system

“Multi – position type head” allows direction of contra angle to be changed easily.

The LCD panel enhances user friendliness.

Operates continuously for more than 2 hour (Dependent  upon rated load)

Memory for up to 5 programs. RESET bottom can be use once the error occurs.

The auto reverse function is activated dependingon the Comparison between load and set torque. A wide varietyof functions such as “AUTO REVERSE”, “AUTO STOP”,“AUTO REVERSE OFF”, “REVERSE” and “AUTO RECIPROCATING” are available.

The motor can be turnedon and off by pressingthe ON/OFF key. Alternatively the unit can be operated by holding down the ON/OFF key during operation and letting go of the ON/OFF key to stop the handpiece.

The motor softlystarts. Since the rotationbriefly stops before changing direction there are no vibrations and shocks during the change of directions.

The motor will be turned into sleeping mode without any action in 10 minutes, click “power” key to wake up

Therotating speed and torque can be compensated perfectly by the controlling chip

Charging interface is designed as MICRO USB

90 minutes, battery will be fully charged.

The contra angle provided for this productcan be autoclaved at 135°C (excluding the motor)..

 

Specification

Battery Adaptor

Adaptor Mode G DP06AH-0500500-  EU
InputVoltage 100-240 – 50/60Hz 0.25A
InputPower 2.5vA
Output Voltage DC5V/0. 5A

 

Motor Handpiece

MODE MARC—III
InputVoltage DC3.7V
Input Power Max7VA
Charging time Approx.90.  min

 

Use environment

Temperature 10-40°C
Humidity 10-70%(Non  condensing)
Atmospheric Pressure 1060h Pa

 

Store environment

Temperature — 10—50°C
Humidity 10-80%(No  n  condensing)
Atmosphericpressure  

500-1060h Pa

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “BOMEDENT Endo motor”

Your email address will not be published.